Differences

This shows you the differences between two versions of the page.

--- setup_script_tutorial [2020/01/16 16:44] – lucy
+++ setup_script_tutorial [2020/01/16 17:42] – lucy
@@ Line 17: / Line 17: @@
 **STEP 1: "Network Settings"** If you selected “No” in the first menu, you will be asked to configure the network settings (IP address). If you have a DHCP server just choose DHCP. Otherwise, configure your IP address manually. If you selected DHCP it can take a while until the settings are saved since LUCY will also test the connection.  \\
-{{ test2.png?direct&1200 }}
+{{ 9.jpg?direct&600 }}\\
+\\
   * //**Troubleshooting - DHCP fails**: If the DHCP fails to obtain an IP address double check that you have enabled BRIDGED mode - especially if you have installed LUCY within a virtualized environment. Also, make sure that no Firewall is blocking access to the DHCP server on your HOST computer and no MAC restrictions are defined on your WLAN/LAN.//
-**STEP 2: "HSM configuration"** The configuration can be done only once during a fresh install. It is not available with Automatic Configuration.  \\
-{{ step2.png?direct&1200 }}
-[[hsm_db_encryption|How to configurate HSM Database encryption]]\\
-\\
-**STEP 3 "Domain & User Configuration":**  If you are setting up LUCY for the first time, you will automatically switch to the Domain & User Configuration. LUCY needs a name pointing to the server. It can be anything (like « test.phishing.local » or simply « phishing »). The default name is phish.local. If you hit enter, it will keep this name. Otherwise, provide the DNS name (e.g. a DynDNS name) you have already registered for that IP.\\
+**STEP 2 "Domain & User Configuration":**  If you are setting up LUCY for the first time, you will automatically switch to the Domain & User Configuration. LUCY needs a name pointing to the server. It can be anything (like « test.phishing.local » or simply « phishing »). The default name is phish.local. If you hit enter, it will keep this name. Otherwise, provide the DNS name (e.g. a DynDNS name) you have already registered for that IP.\\
-{{ step3.png?direct&800 }}\\
+{{ 10.jpg?direct&600 }}\\
   * //**Troubleshooting - Private vs. Public Domain**: If you give LUCY a domain name, which is not registered on the internet, you will only be able to use it on your browser if you create a host file on your PC from where you accessed LUCY.//
@@ Line 33: / Line 31: @@
 \\
-**STEP 4:**  Next, the database of Lucy will configurated. \\
+**STEP 3:**  Next, you will be asked to enter a user and a password. This will be needed for the web login.\\
-{{ step4.png?direct&1000 }}\\
+{{ 11.jpg?direct&600 }}\\
 \\
-**STEP 8:** The summary of your settings is shown when you have successfully finished the configuration. Press Enter to start the web service with your settings. You don't need to exit the script menu. All remaining configuration is done within the web browser.\\
+**STEP 4:** The summary of your settings is shown when you have successfully finished the configuration. Press Enter to start the web service with your settings. You don't need to exit the script menu. All remaining configuration is done within the web browser.\\