Many campaigns fail because the test emails end up in the SPAM folder (e.g. if you define a sender email domain that does not exist, most email servers will reject that email as SPAM. Also, sending an email with a link that contains only an IP address instead of a domain or has certain keywords, may also trigger SPAM filters). There are many reasons for getting filtered and a few things that can be done. More info can be found here. This SPAM check does not replace the checklist, but it gives the user a quick indicator about possible issues.
LUCY has two SPAM checks build into the product:
If you only want to run a SPAM check without starting the campaign you can go to the navigation item "Support/Spam Test" and select the campaign which you want to test against SPAM.
The SPAM check is testing your DNS settings (SPF, PTR etc.), see if the IP or domain is listed in any blacklists and verifies if the content of your landing page or message contains any suspicious words that give it a high SPAM rating.
This depends very much on your settings (advanced settings | Spam Tests): if yoz select "use full blacklist" LUCY will test your domain/IP against more than 200 online databases. This can take up to 30 minutes.
Spam filters identify Spam based on a long list of criteria, but generally they consider:
The goal of a phishing campaign is people testing. So you don't want to spend too much time in creating a hack that allows you to bypass an external email filter (since most email filters are "black boxes" the only way of preventing you from being filtered is using some very time consuming trial & error methodology). Therefore we strongly recommend creating a whitelist entry on your SPAM/Email defense solution (whitelist either LUCY's domain or IP). If this is not possible you try a few other things to get a better SPAM score or bypass filters:
Use an external mail server Using an external mail server with an existing domain configured could be the easiest and quickest workaround to prevent SPAM issues.
Set helo/ehlo SMTP host name in LUCY It is recommended to create a SMTP server name (that is the server name of LUCY). Most SMTP servers will accept your mail if you simply have a reverse DNS entry. It does not have to match the domain name on your e-mail address. Some SMTP servers will reject mail if the reverse DNS doesn't match the HELO/EHLO hostname used in the connection. If your mail server's hostname is mail.example.com then your reverse DNS, MX record, HELO/EHLO, and SMTP greeting banner should all be mail.example.com as well. According to RFC 2821 the SMTP client MUST, if possible, ensure that the domain parameter to the EHLO command is a valid principal host name (not a CNAME or MX name) for its host. If this is not possible (e.g., when the client's address is dynamically assigned and the client does not have an obvious name), an address literal SHOULD be substituted for the domain name and supplemental information provided that will assist in identifying the client. An SMTP server MAY verify that the domain name parameter in the EHLO command actually corresponds to the IP address of the client. You can save this under the mail Settings:
Review Your Email Content Spam filters consider a long list of criteria when judging the “spamminess” of an email. They’ll weigh each factor and add them up to determine a Spam score which then determines whether a campaign will pass through the filter. They might look for spammy phrases like “CLICK HERE!” or “FREE! BUY NOW!”. Then they'll assign points every time they see one of those phrases. Certain criteria get more points than others. Here’s a sample of criteria from SpamAssassin:
LUCY allows you to Review the mail Content with the local SPAM assassin engine:
Use a Corporate Email Account as Your Sender Address If you use a major ESP and send email using personal email addresses such as email@example.com or firstname.lastname@example.org, ISPs like Google will block your email. Why? Yahoo and AOL tell them to! The solution is to use your corporate email address or a domain owned by you. But please watch out: if your Company domain is "mycompany.com", you probably won't be able to use this domain as a sender as spoofing attempts are most likely detected if your domain has a SPF entry. You can validate this here: https://mxtoolbox.com/spf.aspx
Use Descriptive Text Instead of URLs as Link Text Spam filters try to block phishing attacks where attackers encourage readers to click on a well-known text URL that links to a different URL (attacker website). For example, a victim of a phishing attack would see "http://chase.com" in an email but upon clicking the link, they would be directed to "http://attackerwhostealsyouridentity.com". Because of this shady tactic, you should avoid using URLs as link text. Instead, use descriptive text.
Make Sure You Are Not on Blacklists If you are sending from your own IP address, you can use tools like MX Toolbox (https://mxtoolbox.com/blacklists.aspx) or LUCY's build in checks to verify and get alerted if your IP gets on a blacklist.
It Matters Where You’re “From” Mailbox providers evaluate more than just the sender’s IP, domain and content. They also pay attention to your "From" field addresses. Therefore avoid obscure From field names, such as: “email@example.com”, “firstname.lastname@example.org”. Use clear, trustworthy From field names, such as: “contact@”, “newsletter@”, “support@”, feedback@”
Keep the Format Simple Avoid the use of background colors, large or unusual fonts, or more than one font. In other words, don't make your email look like an advertisement or a brochure. Avoid coding sloppy HTML - usually from converting a Microsoft Word file to HTML. Avoid creating an HTML email that’s nothing but one big image with little or no text. Spam filters can’t read images, so they assume you’re a spammer trying to trick them. Using the word “test” in the subject line. Agencies can run into this issue when sending drafts to clients for approval.
Limit the Number of URL Links Spam filters are wary of link-laden messages because spammers tend to scatter links around their messages, hoping that the reader will click on at least one.
Create a Unique Subject Title In your e-mail header, include something unique to the recipient that's unlikely to be in a Spam message. Examples could include your company name, the name of one of your target's competitors, or the name of a person with whom the target is already familiar.
Review Your Sending Method and Ask Your Client to Whitelist the IP Sending a test to multiple recipients within the same company might cause some problems. That company’s email firewall often assumes it’s a Spam attack. To perform a phishing attack, you might need to whitelist LUCY's IP on the remote firewall or SPAM filter.
Optimize your DNS settings Don't use an existing common domain name (like apple.com) already reserved by a third party. Never use a domain that does not exist. Reserve a similar domain name or one that relates to the service you describe in the email (example: get-your-secure-mail.com). Set an MX, A & a SPF record for the domain you use in the test that all point to LUCY for that domain. Enable LUCY's DKIM feature and save the corresponding DNS txt record. Also check: Did you use an email address with a domain that points to a different MX record? If you use email@example.com as an example for the sender most email servers will block that email since LUCY is not the official email server for this service.
Watch out when you spoof your own domain Did you define your own company domain as a sender? Example: You try to phish your employees with the domain mycompany.com which is actually the official domain for your company? The problem is that there might be a DNS record (example SPF) that defines which mail server is allowed to send mails on behalf of this domain. If such a record exists your email server will deny emails coming from a different server using this domain. The solution is: If you still want to perform a phishing test, with a domain like the one from your company, we recommend reserving a similar domain like “my-company.com” or strategically place a typo like “myconpany.com”. Most users won’t recognize the difference and you'll have an additional feature to test awareness.
Set a PTR (reverse DNS) Some SPAM filters like http://www.spamcannibal.org/ will put an IP address without a valid PTR & A-Record on a blacklist. To prevent this, we recommend defining a PTR (reverse DNS) for the IP address where LUCY is installed and sending mails. This must be a unique FQDN (like testing.example.com). You still will be able to associate more than one domain with LUCY. But it is only possible to define one PTR per IP. The PTR record can only created by your provider or us (in case you order our VPS).
Avoid using a tracking image in the mail (Do not click: "track opened mails") Tracking images (the small size) lead to a higher SPAM score. So try to uncheck this option in case you get filtered.
Avoid using advanced LUCY Features like BeEF Framework The BeEF Framework is often detected by scanners that follow the links. This will raise the chance your mail gets flagged as SPAM.
Test your IP & Domain reputation If you mails still get flagged you can test your domain/reputation (see details in this article: https://sendgrid.com/blog/5-ways-check-sending-reputation/).
Don't send too much at the same time If you send hundreds of mails without throttling down the delivery you might get flagged as SPAM very quickly. Please use the scheduler to slow down mail delivery.
Step 1 - TEST MAIL Send to the desired recipient a test mail using a sender with a 3rd party domain name that has no SPF (e.g. "firstname.lastname@example.org) or a valid domain configured on LUCY.
The test mail is always a text only mail with no suspicious content. If the test mail does not arrive it is possible that the email filter is blocking any mail communication from an unknown IP (if there is no known activity log about that IP in the internet). In such a case you can either try to configure an external mail server.
Step 2 - IDENTIFY THE ISSUE THAT TRIGGERS THE EMAIL FILTER Start altering the message & domain settings: it is very important that you slowly start altering the settings in order to identify the reason for getting filtered. One of the first changes you might want to try is playing around with different domain names (e.g. a different domain as a sender mail, the using a different domain for the landing page and maybe also just use a link with an IP address only). If there is no effect in using different domain names make sure that the domain settings are correct. Keep the mail & landing page as simple as possible in the beginning and then start adding content.
Step 3 - TEST RUN After you identified and removed the issues that caused the mails to get filtered we recommend doing a test run. The test run should be done with one target email accounts to see if the email gets filtered and how the link is accessed (sometimes a SPAM filter can automatically access the link in the email before the user can. This will make it impossible for LUCY to know if the link was really clicked).
Step4 - REAL CAMPAIGN Once you started the campaign you might still have a situation where mails get filtered. To investigate this:
There are three possible message scenarios in case mails are still being filtered:
In case of "c" (if there is was no obvious error) you have two possibilities:
Some providers will block all mails or automatically flag them as SPAM from any new mail server that has no activity logs in the internet (like Microsoft or Gmail). Microsoft Points out that any new mail server will have a higher likelihood of getting blocked (https://mail.live.com/mail/troubleshooting.aspx). In any case you could also request to get whitelisted (here a link for Microsoft: https://support.microsoft.com/en-us/getsupport?oaspworkflow=start_220.127.116.11&wfname=capsub&productkey=edfsmsbl3)
Note: If you are sending emails from a new or “cold” IP address, abrupt spikes in email sending volumes can harm your IP’s reputation. To prevent this, you need to warm your IP address up gradually over time to establish your IP address as a legitimate email sender among Internet Service Providers (ISPs). Properly warming up your IP address is a crucial step in building your email sending reputation and improving delivery performance. The key to warming your IP address is to spread out your initial sends over multiple days.
Your Sender Score can affect your deliverability in a few ways. Senders with scores below 70 generally have emails coming from their IP aggressively filtered – your emails are more likely to end up in junk folders. Senders with scores above 70 generally have filtering applied to individual emails and campaigns, rather than their IP address.
There are several things you can do to improve and maintain a good Sender Score. Maintaining consistent sending volumes and schedules, staying off blacklists, and warming your IP address are all great ways to keep your Sender Score healthy.