Differences

This shows you the differences between two versions of the page.

--- setup_script_tutorial [2019/07/25 12:50]
127.0.0.1 external edit
+++ setup_script_tutorial [2020/01/16 18:05] (current)
lucy
@@ Line 12: / Line 12: @@
 ==== Automatic Setup ====
-After turning on the virtual machine, you can either let LUCY do all the configuration (select “Y”) or you can manually configure Lucy (select “No”). In case if you choose "Yes" LUCY will do the complete setup and won't ask you for further input. Choose "Yes" only if you have DHCP (Dynamic IP Address) enabled. At the end of the automatic setup, you will be given a login and password which you will need to authenticate for the web GUI. In case if you forgot to write down the password, you can still go into the manual setup and create a new user and a new password.\\
+At the first start Setup Script, you can either let LUCY do all the configuration (select “Y”) or you can manually configure Lucy (select “No”). In case if you choose "Yes" LUCY will do the complete setup and won't ask you for further input. Choose "Yes" only if you have DHCP (Dynamic IP Address) enabled. At the end of the automatic setup, you will be given a login and password which you will need to authenticate for the web GUI. In case if you forgot to write down the password, you can still go into the manual setup and create a new user and a new password.\\
 ==== Manual Setup ====
 **STEP 1: "Network Settings"** If you selected “No” in the first menu, you will be asked to configure the network settings (IP address). If you have a DHCP server just choose DHCP. Otherwise, configure your IP address manually. If you selected DHCP it can take a while until the settings are saved since LUCY will also test the connection.  \\
-{{ 9.jpg?direct&600 }}\\
+{{ step1.png?direct&600 }}
-\\
   * //**Troubleshooting - DHCP fails**: If the DHCP fails to obtain an IP address double check that you have enabled BRIDGED mode - especially if you have installed LUCY within a virtualized environment. Also, make sure that no Firewall is blocking access to the DHCP server on your HOST computer and no MAC restrictions are defined on your WLAN/LAN.//
+**STEP 2: "HSM configuration"** The configuration can be done only once during a fresh install. It is not available with Automatic Configuration.  \\
+{{ step2.png?direct&600 }}
-**STEP 2 "Domain & User Configuration":**  If you are setting up LUCY for the first time, you will automatically switch to the Domain & User Configuration. LUCY needs a name pointing to the server. It can be anything (like « test.phishing.local » or simply « phishing »). The default name is phish.local. If you hit enter, it will keep this name. Otherwise, provide the DNS name (e.g. a DynDNS name) you have already registered for that IP.\\
+[[hsm_db_encryption|How to configurate HSM Database encryption]]
-{{ 10.jpg?direct&600 }}\\
+**STEP 3 "Domain Configuration":**  If you are setting up LUCY for the first time, you will automatically switch to the Domain & User Configuration. LUCY needs a name pointing to the server. It can be anything (like « test.phishing.local » or simply « phishing »). The default name is phish.local. If you hit enter, it will keep this name. Otherwise, provide the DNS name (e.g. a DynDNS name) you have already registered for that IP.\\
+{{ step3.png?direct&800 }}\\
   * //**Troubleshooting - Private vs. Public Domain**: If you give LUCY a domain name, which is not registered on the internet, you will only be able to use it on your browser if you create a host file on your PC from where you accessed LUCY.//
@@ Line 31: / Line 34: @@
 \\
-**STEP 3:**  Next, you will be asked to enter a user and a password. This will be needed for the web login.\\
+**STEP 4:**  Here,the database of Lucy will be configurated. \\
-{{ 11.jpg?direct&600 }}\\
+{{ step4.png?direct&1000 }}\\
-\\
-**STEP 4:** The summary of your settings is shown when you have successfully finished the configuration. Press Enter to start the web service with your settings. You don't need to exit the script menu. All remaining configuration is done within the web browser.\\
+**STEP 5: "User Configuration"** Next, you will be asked to enter a user and a password. This will be needed for the web login. \\
+{{ step5.png?direct&1000 }}\\
+\\
+**STEP 6: "User Configuration"** Here you get a username and password to enter the command line of your server. **Don't forget to save it!** \\
+{{ step66.png?direct&600 }}\\
+\\
+**STEP 7:"Finish"**   Congratulations! You successfully configurated lucy on your server. \\
+{{ step77.png?direct&600 }}\\
+\\
+**STEP 8:** The summary of your settings is shown when you have successfully finished the configuration. Press Enter to start the web service with your settings. You don't need to exit the script menu. All remaining configuration is done within the web browser.\\
 ==== Troubleshooting  ====
-In order to test issues with your connectivity, LUCY offers you a few built-in tools. First choose Menu Item 3: "Network Configuration". In this Menu, you have Menu Item 3 again (Network Tools) that offers you the possibility to test the basic connectivity to the internet (ping, traceroute, route etc.).
+In order to test issues with your connectivity, LUCY offers you a few built-in tools. First choose Menu Item 3: "Network Configuration". In this Menu, you have Menu Item 3 again (Network Tools) that offers you the possibility to test the basic connectivity to the internet (ping, traceroute, route, etc.).
-{{ 767.png?600 }}
+{{ troubleshoot1.png?500 }}
+{{ troubleshoot2.png?600 }}
+{{ troubleshoot3.png?400 }}
-If you have no Network Connectivity, check that you have configured LUCY with the correct Network settings (IP, Gateway etc). If you are using VMware or any other virtualization software, make sure that you have configured LUCY in Bridged mode.
+If you have no Network Connectivity, check that you have configured LUCY with the correct Network settings (IP, Gateway, etc). If you are using VMware or any other virtualization software, make sure that you have configured LUCY in Bridged mode.
 If you see that Network Connectivity is possible, but LUCY is not able to access the internet, it is possible that:
@@ Line 51: / Line 65: @@
 ==== Hardware Optimization (Postgress)  ====
-LUCY (after 3.0) allows you to optimize Postgress DB to use the available memory. In order to optimize Postgress please choose the required item in the menu.
+LUCY (after 3.0) allows you to optimize Postgress DB to use the available memory. In order to optimize Postgress please choose the required item on the menu.
 {{ pg.png?600 }}

LUCY

User Tools

Site Tools

Differences

Page Tools